Soil samplers / 07 of 07
Wintex MCL3
Two metres down. As deep as necessary.
- Depth
- To 120 or 200 cm
- Layers
- Full core
- Samples / hour
- 4
- Drive
- High-frequency hammer
Product information
Maximum power to 200 cm. Automatic control of sampling speed and a high-frequency hammer for representative, homogeneous samples.
The Wintex MCL3 is a strong, powerful sampler chosen by ministries of agriculture, national research institutes and leading contractors in many European countries for the work of complying with the EU Nitrates Directive 91/676/EEC.
Its probe has a specially designed tip for representative, homogeneous samples at full depth, and it has become the leading sampler for 1.20 m and 2 m. A special valve sets the maximum speed for the soil automatically, so there is nothing to adjust by hand.
What makes the MCL3 work.
- 01
- 1.20 m and 2 mDelivered for 1.20 m, or for both 1.20 m and 2 m.
- 02
- High-frequency hammerDrives the probe into any ground, then rotates it for a clean full-depth core.
- 03
- Four functions, one panelRaise the mast, set it down, hammer the probe in, rotate it.
- 04
- MCL3 or MCL3TMCL3 with its own hydraulics for Gators, pick-ups and trailers; lighter MCL3T on tractor hydraulics.
Specifications
- Sampling depth
- 120 cm, or 120 and 200 cm
- Samples per hour
- 4
- Sticks per hour
- 60
- Sticks per sample
- 10–16
- Volume per sample
- 300–500 g
- Probe diameter
- 35 mm
- Hydraulic system
- Honda GX390, 11 hp (MCL3)
- Hydraulic consumption
- 20 l/min, 120 bar
- Hydraulic tank
- 30 litres
- Net weight
- 420 kg (MCL3), 290 kg (MCL3T)
Downloads
Questions about fitting it to your vehicle, or about prices? Your local representative will help, or contact us in Thisted.
Soil sampling with the Wintex MCL3
All films
Next · 0–25 cm
Wintex 1000